DJI Enterprise Releases V4 Firmware for Matrice 300 RTK & Zenmuse L1
A new firmware has been released for the DJI Matrice 300 RTK (M300) and the DJI Zenmuse L1 LiDAR surveying payload. This update includes new features as promised by DJI during the announcement of the Matrice 30 Series and Zenmuse H20N payload earlier this year. The V4 update now allows compatibility for the M300 RTK with DJI Pilot 2, DJI FlightHub 2, and Zenmuse H20N. As a bonus, a separate update also improves the efficiency of mapping missions when using the L1 payload.
Read below for more detailed information on the new update.
DJI Matrice 300 RTK Update Release Notes:
Released Date: 2022.05.11
Aircraft Firmware: v04.00.01.11
Remote Controller Firmware: v04.00.01.10
Pilot 2 App Android: v4.0.1.14
D-RTK 2 Mobile Station for Matrice: v03.01.00.00 (D-RTK 2 Mobile Station: v03.01.00.00)
Intelligent Battery Station: v04.00.01.02
Intelligent Flight Battery: v01.02.05.43
Zenmuse H20 / H20T: v04.00.00.10
Zenmuse H20N: V04.00.02.00
Zenmuse P1: v03.00.01.04
Zenmuse L1: v04.00.01.06
Zenmuse Z30: v01.00.07.10
Zenmuse XT2: v01.00.03.50
Zenmuse XT S: v01.00.00.09
DJI X-Port: v01.03.02.00
DJI Skyport: v01.04.00.00
DJI Skyport V2: v01.03.02.00
DJI Assistant 2 (Enterprise Series): v2.1.3
Firmware Upgrade Methods:
Aircraft / Remote Controller: DJI Assistant 2 / App Zenmuse H20 / H20T: micro-SD card / DJI Assistant 2 / App
D-RTK 2 Mobile Station: DJI Assistant 2
The built-in DJI Pilot 2 app: will be updated with the Remote Controller firmware
Intelligent Battery Station: App (Connect the Battery Station to the remote controller and update it on the HMS page in the DJI Pilot 2 app.)
What’s new?
New Product Support
- Added support for DJI Pilot 2 app, and improved flight safety and task efficiency:
(1) Upgraded home screen, and added support for viewing GEO Zone map, album, and device health status, managing unlocking licenses, cloud services, and flight route tasks.
(2) Upgraded camera view and added support for quick control of aircraft and camera and a clearer display of task information and flight status.
(3) Adjusted PinPoint size according to the distance between PinPoint and aircraft, and added support for displaying icon indicating Home point and PinPoint positions.
(4) Made sure warning messages are displayed accurately and timely, and warning history can be checked quickly.
(5) Added support for managing PinPoints, adding, deleting, selecting, and viewing PinPoints using 5D button, and adding lines and areas in map view.
- Added support for DJI FlightHub 2:
(1) Added support for cloud livestreams with Zenmuse H20 series.
(2) Added support for displaying points, lines, and areas in DJI Pilot 2 and DJI FlightHub 2 at the same time.
(3) Added support for real-time media files upload from DJI Pilot 2, viewing photos and panoramas, and managing media files in DJI FlightHub 2.
(4) Added support for visible light and infrared cloud mapping with Zenmuse H20 series, and checking mapping data in both DJI Pilot 2 and DJI FlightHub 2.
(5) Added support to create cloud flight routes and manage routes in both DJI Pilot 2 and DJI FlightHub 2.
- Added support for DJI Zenmuse H20N.
DJI Zenmuse L1 Update Release Notes:
Release Date: 2022.05.11
DJI L1 Firmware: v04.00.01.06
Firmware Upgrade Method: DJI L1 - SD card / Update All in App
M300 RTK aircraft firmware required: v04.00.01.11
M300 RTK remote controller firmware required: v04.00.01.10
DJI Pilot 2 App Required: v4.0.0.74 (M300)
What’s New?
- Optimized flight route smoothness to improve the efficiency of Terrain Follow missions.
- Added IMU Calibration to Terrain Follow, Oblique and Linear Flight missions.
- The calibration strategy for Waypoint missions is now optimized. IMU Calibration will not be performed when the flight time between two waypoints is less than 100 seconds. IMU Calibration will be performed when the flight time between two waypoints is more than 100 seconds.
- Supported to generate the original satellite observation and record files when capturing photos with the mapping camera.
- Added to set the forward overlap (visible) parameter for the mapping camera when using Mission flight.
- Fixed an occasional issue: where photos were missed when using the Photogrammetry mission.
Notes
- Make sure that the aircraft firmware, remote controller firmware, DJI L1 firmware, and DJI Pilot 2 app firmware are updated to the latest.